CYFRE™ CB-HP-1900 Wireless Commercial Office Amplifier Single Band Wireless Amplifier for All North American 1900 MHz Carrier Systems Features / Benefits • Increased revenue through customer retention • Less cell site build out • Keeps customers connected to utilize the full potential of their phones and network services. • Carrier friendly in urban areas • 68 Users simultaneously regardless of frequency • Easily Covers 40,000 square feet between multiple floors • Requires zero additional bandwidth from cell towers • Case designed for Zero RF Emissions | Cyfre™ Amplifiers seamlessly bridges RF amplification between Cell Towers and todays elaborate handsets without disrupting the carrier’s tower management Networks. Thus, the entire Cyfre™ line of amplifiers becomes an integral part of all wireless network solutions. Network Compatibility
Cyfre's™ creation of the Digital Microprocessor, combined with licensed Motorola patented technology, have achieved compatibility with the following standards. CDMA 2000, TIA/E-98-A&D, 1xRTT, TIA/EIA-690 Analog (dual-mode), IS-95-A&D, and GSM. Cyfre’s™ cutting edge technology will change forever the perception all RF amplifiers are the same and deplete valuable bandwidth from tower management systems. Independent laboratories accredited by the FCC/IC regulators verify all Cyfre™ claims. Six Sigma Certification
Cyfre™ strives for the highest quality manufacturing standards possible. Cyfre™ products are manufactured under Six Sigma Certified Process Control Standards, far exceeding ISO 9001 and 9002 manufacturing facilities. Made in the USA
The complete line of Cyfre™ amplifiers are manufactured in the USA Optional Amplifier Kit Includes: • Cyfre™ Bi-Directional Wireless Commercial Office Amplifier
• Indoor Antenna
• External Antenna
• AC Power Adapter
Frequency Specifications | Specifications | TX Uplink | RX Downlink/Receive | | Frequency Range: | 1850.0 – 1910.0 MHz | 1930.0 – 1990.0 MHz | Uplink 1850.0 - 1910.0 MHz 70dB
Downlink 1930.0 - 1990.0 MHz 70dB
Gain 70dB maximum
Maximum power measured into 50 ohms at the antenna terminal.
General Specifications
Input Voltage 8.0 VDC – 28.0 VDC
Current draw 0.170 to 890 mah.
RF Input Power 10 – 60mW
Receiver Sensitivity -110dBm (maximum)
Noise level >4.2 dB
VSWR less than 1.9 at the handset connection
Signal Sensitivity -115dBm (maximum)
Temperature range: Operating -30 C to +60 C performing within specification
-40 C to +90 C without loss of function
Storage -40 C to +90 C
Humidity 85% at +85 C
Impedance 50 ohms
Dimensions:
Length: 8 inches – Width: 5 inches – Height: 2.13 inches – Weight: 3 lbs
RF connector: TNC Female
Tested on the following standards which it meets or exceeds:
IS-95, IS-98, IS-2000, 1XRTT, AMPS, CDMA, TDMA, GSM, W-CDMA, EDGE, EVDO Rev 0, EVDO Rev A
FCC ID: RFK-CBAHP1900
IC: 5252A-CBAHP1900
Laboratory testing completed by:
DNB Engineering, Riverside, California; Rohde and Schwarz, Orlando, Florida
The specifications shown are subject to change at any time.
The company reserves the right to make changes without notice.
This product manufactured under license from Motorola, Inc., “lpkmot™”.
This product is produced under the following US and foreign patents;
5815804, 6049704, 4896124, 5060294, 6025753, 6281748, 6496708, 5438684, and EP1035657.
|
